TechWave Audio

MCM-100-EX : Four Output Expansion Module for the MCM-100 Midi to CV Module

Model: MCM-100-EX

Now accepting pre-orders – reserve yours now!

Does your MCM-100 Midi to CV Module not have enough outputs for you? The MCM-100 has the ability to be expanded with four additional CV outputs with the plug-and-play MCM-100-EX Expansion Module in a small 2hp format.

Adding the MCM-100-EX Expansion Module to your setup is easy:

  • Turn off power to your MCM-100 module and pull the MCM-100 module out of the rack.
  • Attach one side of the MCM-100-EX expansion cable to the 2×05 pin header on the rear of the MCM-100 module near the power connector. Be sure the red stripe of the cable is down (near the IDC power connector).
  • Attach the other side of the expansion cable to the keyed IDC connector on the MCM-100-EX module.
  • Put everything back in your rack and power on.

That’s it. The MCM-100 Midi to CV Module will automatically detect when the expansion is installed, and it will expose additional configuration options through the settings menu.

No additional power requirements are needed as all power inputs come from the MCM-100 Midi to CV Module.